Be trained and knowledgeable of the construction and operation of equipment or a specific work method, and be trained to recognize and avoid the electrical hazards that might be present with respect to that equipment or work method.An employee who is undergoing on-the-job training and who, in the course of such training, has demonstrated an ability to perform duties safely at his or her level of training, and who is under the direct supervision of a qualified person shall be considered to be a qualified person for the performance of those duties. Note: Unqualified persons assisting in energized electrical work must be under the direct supervision of a qualified person for the duration of the exposure once they cross the Limited Approach Boundary or the Arc Flash Protection Boundary. It is not intended to provide the technical skills and knowledge necessary to work on electrical systems or components, nor does it authorize any person to do so.Ī person can be considered qualified with respect to certain equipment and methods, but unqualified for others. Note: Environmental Health & Safety Electrical Qualified Person training provides information related to live electrical work hazards and selection and use of appropriate personal protective equipment. Environmental Health & Safety training is intended to work in conjunction with any on-the-job technical training that the department provides or requires. authorized) by their department to perform work on energized electrical systems or equipment and must attend relative required Environmental Health & Safety training. Qualified persons must be designated (i.e. Unsafe electrical conditions should be reported to the Division of Campus Planning, Infrastructure, and Facilities immediately for correction at 54. Departments must ensure that electrical systems and related equipment are maintained in a safe manner in order to protect employees, students, and the public from hazardous conditions.The principal investigator and/or the program supervisor are responsible for assuring the acceptability of experimental electrical wiring and apparatus. To facilitate compliance with these requirements, it is recommended that the department assign the duties outlined in this program to either a safety committee composed of qualified faculty and staff, the principal investigator, and/or the program supervisor as appropriate for the scope of departmental operations and conditions of use. Departments involved in electrical research must ensure that all projects are designed in compliance with accepted safety criteria and code intent.Departments must ensure that all employees performing electrical work have attended Environmental Health and Safety Electrical Qualified Person training, Lockout/Tagout Authorized Person training, and are currently certified in first aid/CPR/AED.Each department performing energized electrical work must ensure that personnel assigned to such work are qualified, trained, provided with appropriate protective equipment, and are following approved procedures.Unqualified persons are those with little or no such training.ĭepartments are expected to maintain safe and healthy living, learning, and working environments for faculty, staff, students, and visitors to our campus. Note: A individual undergoing on-the-job training who has demonstrated the ability to perform duties safely at his or her level of training, and who is under the direct supervision of a qualified person, is considered to be a qualified person for the purpose of those duties. Only qualified persons may place or remove locks and tags on energized electrical systems. An individual may be qualified to work, for example, on circuits up to 600 volts, but may be unqualified to work on higher voltages. Qualified persons are those who have received specific training and have demonstrated the skills necessary to work safely on or near exposed energized parts. The training offered by Environmental Health and Safety associated with this program covers personal safety issues regarding work on electrical systems and includes relative information to be gathered while analyzing electrical-related hazards, which safe work practices may apply, and selection, use and care of appropriate electrical-related personal protective equipment. This program provides a system for ensuring that personnel performing energized electrical work, including voltage testing and diagnostics, are trained in the safety aspects of such work and have been qualified by their supervisor to perform the task assigned. Occupational Safety and Health Program for Animal Handlers
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |